 | Jacek Matys |
Prominent publications by Jacek Matys
Er:YAG Laser for Metal and Ceramic Bracket Debonding: An In Vitro Study on Intrapulpal Temperature, SEM, and EDS Analysis
[ PUBLICATION ]
OBJECTIVE: To evaluate the effects of bracket removal using an erbium laser on the pulp temperature and enamel surface.
BACKGROUND: Removal of orthodontic brackets with conventional debonding pliers may result in enamel cracks. To avoid damage to the enamel surface and effectively remove metal or ceramic brackets, different types of lasers, such as Nd:YAG, CO2, TM:YAP, diode laser, or Er:YAG, have been introduced for debonding.
MATERIALS AND METHODS: A total of 55 brackets (n = 55; 20 ...
| Known for Yag Laser | Vitro Study | Enamel Surface | Ceramic Bracket | Intrapulpal Temperature |
Introduction: Various procedures in dental implantology are performed to enhance the bone healing process and implant stability. One of these methods can be a low-level laser therapy (LLLT).
Objectives: The aim of our study was to evaluate the stabilization (primary and secondary) and bone density in peri-implant zone after LLLT protocol using a 635 nm diode laser.
Material and Methods: The research included 40 implants placed in the posterior region of a mandible in 24 patients (8 women ...
| Known for Secondary Stability | Diode Laser | Randomized Clinical Trial | 635 Nm | Control G2 |
Low-Level Laser Therapy with a 635 nm Diode Laser Affects Orthodontic Mini-Implants Stability: A Randomized Clinical Split-Mouth Trial
[ PUBLICATION ]
BACKGROUND: The study aimed to clinically estimate an influence of a 635 nm diode laser on the stability of orthodontic mini-implants, to assess mini-implants loss, and to evaluate a pain level after the treatment.
MATERIALS AND METHODS: The randomized clinical split-mouth trial included 20 subjects (13 women and 7 men; age: 32.5 ± 6.1 years), 40 implants (RMO, West Colfax Ave., Denver, CO, USA) with a diameter 1.4 mm and length of 10 mm. Mini-implants were placed in the area of the ...
| Known for Orthodontic Mini | Implants Stability | Diode Laser | 635 Nm | Total Energy |
It is important to identify factors that affect primary stability of orthodontic mini-implants because it determines the success of treatment. We assessed mini-implant primary stability (initial mechanical engagement with the bone) placed in pig jaws. We also assessed mini-implant insertion failure rate (mini-implant fracture, mini-implants to root contact). A total of 80 taper-shaped mini-implants (Absoanchor® Model SH1312-6; Dentos Inc., Daegu, Korea) 6 mm long with a diameter of ...
| Known for Yag Laser | Orthodontic Mini | Mm Bone | Drilling Method | Dental Implants |
Retrieval of Glass Fiber Post Using Er:YAG Laser and Conventional Endodontic Ultrasonic Method: An In Vitro Study
[ PUBLICATION ]
PURPOSE: To compare the times and temperatures used to remove a glass fiber post from an endodontically treated tooth using erbium-doped yttrium aluminum garnet (Er:YAG) compared to conventional endodontic ultrasonic method.
MATERIALS AND METHODS: Thirty-four single-root human extracted teeth were endodontically treated ex vivo. The post space was prepared to 7 mm in depth and a 11.4 mm glass fiber post was cemented using composite resin cement. Specimens were kept in 100% humidity for ...
| Known for Yag Laser | Vitro Study | Post Removal | Glass Fiber | Ultrasonic Method |
Effects of Nd:YAG laser irradiation on the growth of Candida albicans and Streptococcus mutans: in vitro study
[ PUBLICATION ]
The purpose of this study was to evaluate the effects of Nd:YAG laser with flat-top handpiece on the in vitro growth of Candida albicans and Streptococcus mutans. The incidence of C. albicans (opportunistic commensal) and S. mutans (facultatively anaerobic) infections is increasing, despite available treatments. Cultures of Streptococcus mutans and Candida albicans were irradiated using Nd:YAG laser (LightWalker, Fotona) with flat-top handpiece (Genova, LightWalker, Fotona) at the ...
| Known for Streptococcus Mutans | Yag Laser | Candida Albicans | G1 G2 | Vitro Study |
Many inserted implants are affected by peri-implantitis. The aim of our study was to evaluate increases in implant temperature, depending on the diameter and chemical composition of implants. In particular we measured the time it takes for the temperature of an implant to rise by 10°C and evaluated laser power settings required to prevent thermal injury when an implant surface is decontaminated during the treatment of peri-implantitis. The study analysed six implants placed in porcine ...
| Known for Vivo Study | Yag Laser | Temperature 10°c | Titanium Implants | Implant Surface |
The most common adverse effect after bone cutting is a thermal damage. The aim of our study was to evaluate the bone temperature rise during an alveolar ridge splitting, rating the time needed to perform this procedure and the time to raise the temperature of a bone by 10°C, as well as to evaluate the bone carbonization occurrence. The research included 60 mandibles (n = 60) of adult pigs, divided into 4 groups (n = 15). Two vertical and one horizontal cut have been done in an alveolar ...
| Known for Yag Laser | Vivo Study | Thermal Damage | Temperature Measured | 200 Mj |
Effect of ozone and diode laser (635 nm) in reducing orthodontic pain in the maxillary arch—a randomized clinical controlled trial
[ PUBLICATION ]
The effect of ozone, diode laser irradiation, and presence of teeth crowding/spacing on pain perception in orthodontic patient was tested. Overall, 76 patients [55 women and 21 men; age 35.1(6.4) years] who met the inclusion criteria participated in the study. Immediately after fixed orthodontic appliance placement, the patients were exposed to a pain relief treatment (one single session) using either 635-nm diode laser (SmartM, Lasotronix, Warsaw, Poland) or ozone therapy (OzoneDTA, ...
| Known for Diode Laser | 635 Nm | Pain Perception | Maxillary Molar | Appliances Fixed |
Efficacy of Toluidine Blue—Mediated Antimicrobial Photodynamic Therapy on Candida spp. A Systematic Review
[ PUBLICATION ]
The effectiveness of antimicrobial photodynamic therapy (aPDT) in the treatment of oral yeast infections was examined many times in recent years. The authors of this review tried to address the question: "Should TBO (toluidine blue ortho)-mediated aPDT be considered a possible alternative treatment for oral candidiasis?". PubMed/Medline and the Cochrane Central Register of Controlled Trials (CEN-TRAL) databases were searched from 1997 up to the 27th of October 2020 using a combination of ...
| Known for Toluidine Blue | Candida Spp | Photodynamic Therapy | Oral Candidiasis | Mediated Antimicrobial |
Removal of Composite Restoration from the Root Surface in the Cervical Region Using Er: YAG Laser and Drill—In Vitro Study
[ PUBLICATION ]
BACKGROUND: Recently, the defects of the tooth surface in the cervical region are often restored using composite filling materials. It should meet the needs of the patients regarding esthetics and material stability. The aim of the study was to analyze the tooth root surface at the cervical region after the removal of the composite filling material by means of the Erbium-doped Yttrium Aluminium Garnet (Er: YAG) laser or drill using the scanning electron microscopy (SEM) and fluorescence ...
| Known for Yag Laser | Tooth Surface | Removal Composite | Cementoenamel Junction | 15 Mm |
Jacek Matys: Influence Statistics
| Concept | World rank |
|---|---|
| brackets yag laser | #3 |
| measured piezosurgery | #3 |
| yag laser piezosurgery | #3 |
| 6 irradiation distance | #3 |
| eds higher percentage | #3 |
| 55 brackets | #3 |
| ridge yag | #3 |
| study groups piezosurgery | #3 |
| enamel cracks damage | #3 |
| bracket motion technique | #3 |
| brackets circular | #3 |
| μs diameter | #3 |
| metal brackets comparison | #3 |
| circular motion technique | #3 |
| carbonization occurrence | #3 |
| debonding scanning | #3 |
| 60 mandibles | #3 |
| solidstate metals microscopy | #3 |
| 400 mj surgical | #3 |
| debonding comparison | #3 |
| ceramic 00002 | #3 |
| lateral bony windows | #3 |
| cracks eds | #3 |
| mj surgical | #3 |
| piezosurgery yag laser | #3 |
| eds analysis damage | #3 |
| middling 5 minutes | #3 |
| splitting yag | #3 |
| piezosurgery yag | #3 |
| diode laser control | #3 |
| control samples cracks | #3 |
| bone study groups | #3 |
| ridge splitting piezosurgery | #3 |
| cracks enamel surface | #3 |
| brackets 55 | #3 |
| seconds bur | #3 |
| laser 50 mj | #3 |
| pain perception ozone | #4 |
| retrieval process crown | #4 |
| application 635 | #4 |
| eds analysis eds | #4 |
| highest aerosol quantity | #4 |
| handpiece new | #4 |
| black zirc | #4 |
| yag neodymiumdoped | #4 |
| ejector extraoral | #4 |
| handpiece saliva | #4 |
| employing periotest | #4 |
| lasotronix warsaw | #4 |
| post yag | #4 |
Key People For Yag Laser
Jacek Matys:Expert Impact
Concepts for whichJacek Matyshas direct influence:Yag laser, Diode laser, Primary stability, Vivo study, Yag lasers, Vitro study, Temperature rise, 635 nm.
Jacek Matys:KOL impact
Concepts related to the work of other authors for whichfor which Jacek Matys has influence:Yag laser, Implant stability, Photobiomodulation therapy, Vitro study, 980 nm, Post removal, Titanium surfaces.
Tools
Is this your profile? Claim your profile Copy URL Embed Link to your profile |